Toshiba UNINTERRUPTIBLE POWER SYSTEM 1600XP Bedienungsanleitung PDF herunterladen (Seite 78)

1600XP Series Installation and Operation Manual

Refer to Figure 1 for location of UPS referenced material. Refer to Figure 2 for material referring to the

receptacle panel module. There are different panels available depending on the UPS typeform.

Step 1: Remove the modular receptacle panel cover plate.

On the rear of the UPS, locate the cover plate for the receptacle panel module interface

(see Figure 1).

Remove the 6 mounting screws.

Remove the cover plate. A square-shaped plug will be exposed.

Step 2: Snap-In Output Receptacle modular panel.

Carefully mate the square-shaped connector on the UPS to its matching counter part on the rear of the

modular panel.

Step 3: Mount the receptacle panel.

Attach the screws removed from the cover plate through the mounting holes of the receptacle panels and

back into the UPS mounting points.











Figure 1 Figure 2

1 2 ... 73 74 75 76 77 78 79 80 81 82 83 ... 89 90

Keine Kommentare

Toshiba UNINTERRUPTIBLE POWER SYSTEM 1600XP Bedienungsanleitung Seite 78