Toshiba IK-DP30A Bedienerhandbuch PDF herunterladen (Seite 22)

- 22 -

To enable AUTO PATROL:

1. Enter the preset command to access the main menu.

Refer to section 6.1 for the controller model and preset command.

2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/

Tilt menu.

3. Position the cursor next to AUTO PATROL and press the OPEN button to move the cursor to the

right.

4. Move the joystick up or down to scroll through the presets. Move the joystick left or right to turn

the preset ON or OFF.

5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE

button.

6.8.7 SCAN SPEED

The SCAN SPEED for auto scan, random scan and frame scan can be set from 1-90 degrees/sec.

However, this speed is limited by MAX SPEED setting.

EXIT

MAIN MENU PAN/TILT MENU

AUTO FLIP ON

PROPORTIONALP/T ON

SCAN LIMIT STOPS OFF

MANUAL LIMIT STOPS OFF

PARK TIME MIN 0MIN

AUTO PAT R O L P1→OFF

SCAN SPEED 5DEG./S

SCAN TILT ANGLE 30DEG.

STOP TIME 10SEC

MAX SPEED 400DEG/S

To set SCAN SPEED:

1. Enter the preset command to access the main menu.

Refer to section 6.1 for the controller model and preset command.

2. Position the cursor ( ) next to PAN/TILT SETUP and press the OPEN button to access the Pan/

Tilt menu.

3. Position the cursor next to SCAN SPEED and press the OPEN button to move the cursor to the

right.

4. Move the joystick up or down to set the speed.

5. To accept the selection, press the OPEN button or to cancel the selection, press the CLOSE

button.

1 2 ... 17 18 19 20 21 22 23 24 25 26 27 ... 39 40

Keine Kommentare

Toshiba IK-DP30A Bedienerhandbuch Seite 22