Toshiba Tecra S3 Bedienungsanleitung PDF herunterladen (Seite 159)

User’s Manual 8-7

Optional Devices

SD card care

■ Do not write to an SD card if the battery power is low. Low power could

affect writing accuracy.

■ Do not remove an SD card while read/write is in progress.

■ The SD card is designed so that it can be inserted only one way.

Do not try to force the SD card into the SD card slot.

■ Do not leave an SD card partially inserted in the slot. Press the SD card

until you hear it click into place.

■ Do not twist or bend SD cards.

■ Do not expose SD cards to liquids or store in humid areas or lay media

close to containers of liquid.

■ After using an SD card, return it to its case.

■ Do not touch the metal part or expose it to liquids or let it get dirty.

Creation of a boot disk

Within the TOSHIBA SD Memory Boot Utility, a bootable SD memory card

can be created if required. Refer to the Utilities section in Chapter 1,

Introduction, for details.

Memory expansion

You can install additional memory in the computer’s memory module slot to

increase the amount of RAM. This section describes how to install and

remove a memory module.

Set the write-protect switch to the lock position, if you do not want to record

data.

■ Place a mat beneath the computer to prevent scratching or damaging

the computer’s lid when installing/replacing the memory module.

Avoid mats made of materials that generate static electricity.

■ When you install or remove a memory module, ensure that you do not

touch any other internal areas of the computer.

1 2 ... 154 155 156 157 158 159 160 161 162 163 164 ... 249 250

Keine Kommentare

Toshiba Tecra S3 Bedienungsanleitung Seite 159