Toshiba Tecra S3 Bedienungsanleitung PDF herunterladen (Seite 151)

User’s Manual 7-11

HW Setup

Security controller

The security controller settings are available in SYSTEM SETUP (2/2).

TPM

This setting enables or disables the security controller known as TPM

(Trusted Platform Module).

Clear TPM Owner

This setting is used to erase the data in TPM when disposing of the

computer or when the owner of the computer changes, etc. Once this

operation is carried out, the TPM configuration settings are erased, such

that the encrypted data can no longer be decrypted and the files can no

longer be read. Please backup or delete the data as necessary before

carrying out this operation.

The operating procedure is as follows:

1. Move the cursor to the Clear TPM Owner setting and press the Space

key or BkSp key.

2. A message is displayed. Press the Y, E, S, and Enter keys and the

TPM information is erased.

3. The TPM setting changes from being displayed as Enable to Disabled,

and the setting is no longer displayed.

Diagnostic Mode

Set whether the BIOS Setup Diagnostic test is enabled.

Enabled Enables the TPM.

Disabled Disables the TPM (Default).

■ System configuration changes other than changes to this setting

should be made in Windows using TOSHIBA HW Setup, TOSHIBA

Password Utility, TOSHIBA Power Saver, Device Manager, etc.

■ When using TPM, please install the Infineon TPM Installation Guide

from the TOSHIBA Application Installer.

Please ensure that the user reads the Infineon TPM Installation

Guide as it contains usage information and notes on using TPM.

Disabled

(Default)

The Diagnostic test is disabled.

Enabled The Diagnostic test is enabled.

1 2 ... 146 147 148 149 150 151 152 153 154 155 156 ... 249 250

Keine Kommentare

Toshiba Tecra S3 Bedienungsanleitung Seite 151