Toshiba SATELLITE L300 Bedienungsanleitung PDF herunterladen (Seite 118)

User’s Manual 8-9

Optional Devices

When you turn on the power, the computer automatically recognizes the

monitor and determines whether it is color or monochrome.

You can use the HW Setup to select between Auto-Selected, LCD + Analog

RGB or System LCD Only displays. Refer to Chapter 7, HW Setup and

Passwords.

If you have selected

LCD+Analog RGB under the Display options of

the HW Setup, both the external monitor and the internal LCD will be active

when you turn on the computer. If

Auto-Selected is selected, only the

external monitor will be active.

If you have selected System LCD Only under the Display options of the

HW Setup, the internal LCD will be active when you turn on the computer,

even if the external monitor is connected. If

Auto-Selected is selected,

only the external monitor will be active.

To change the display settings, press FN + F5. If you disconnect the

monitor before you turn the computer off, be sure to press FN + F5 to

switch to the internal display. Refer to Chapter 5, The Keyboard, for details

on using hot keys to change the display setting.

HDMI

Some models are equipped with HDMI out port than can send/receive

video, audio and control signals by connecting with external display/audio

devices. 1080p, 720p, 576p and 480p signal formats are supported, but

actually available signal format depends on each HDMI devices. To

connect external devices, follow the steps as detailed below:

1. Plug one end of the HDMI cable into the HDMI port of the HDMI

device.

Connecting a HDMI cable

If you set LCD+Analog RGB for the computer’s display, you must set

the computer’s display resolution to the same as that of the external

monitor or other device, such as a projector.

As the port operation of all HDMI (High-Definition Multimedia Interface)

monitors has not been confirmed, some HDMI monitors may not function

properly.

1 2 ... 113 114 115 116 117 118 119 120 121 122 123 ... 164 165

Keine Kommentare

Toshiba SATELLITE L300 Bedienungsanleitung Seite 118