Toshiba SD490 Bedienungsanleitung PDF herunterladen (Seite 14)

Connections

Notes

• DO NOT connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the AC-3 RF input of a Dolby Digital Receiver. This

input on your A/V Receiver is reserved for Laserdisc use only and is incompatible with the COAXIAL DIGITAL AUDIO OUT jack

of the DVD player.

• Connect the COAXIAL DIGITAL AUDIO OUT jack of the DVD player to the “DIGITAL (COAXIAL)” input of a Receiver or Processor.

• Refer to the owner’s manual of the connected equipment as well.

• When you connect the DVD player to other equipment, be sure to turn off the power and unplug all of the equipment from the wall

outlet before making any connections.

• The output sound of the DVD player has a wide dynamic range. Be sure to adjust the receiver’s volume to a moderate listening

level. Otherwise, the speakers may be damaged by a sudden high volume sound.

• Turn off the amplifier before you connect or disconnect the DVD player’s power cord. If you leave the amplifier power on, the

speakers may be damaged.

• For connection to your TV, see “Connecting to a TV” .

• This section uses the following reference marks.

: Front speaker

: Rear speaker

: Sub woofer

: Center speaker

: Signal flow

Connecting to Optional Equipment

You can enjoy high quality dynamic sounds by connecting the DVD player to optional audio equipment.

Warning

• When you are connecting (via the COAXIAL DIGITAL

AUDIO OUT jack) an AV decoder that does not have Dolby

Digital, Digital Theater Systems (DTS) or MPEG2 decoding

function, be sure to set “Digital Output” to “PCM” from the

on-screen displays. Otherwise, high volume sound may

damage your hearing as well as the speakers.

• When playing DTS-encoded discs (DVDs and audio CDs),

excessive noise may be output from the analog audio output

jacks. To avoid possible damage to the audio system, you

should take proper precautions when the analog audio output

jacks of the DVD player are connected to an amplification

system. To enjoy DTS Digital Surround™ playback, an

external 5.1 channel DTS Digital Surround™ decoder

system must be connected to the COAXIAL DIGITAL

AUDIO OUT jack of the DVD player.

* Settings for HDMI output format are performed using the HDMI button on the remote control or HDMI SELECT button

on the front panel.

Notes

•

Both Composite (Video) and Scart (AV) will not have JPEG pictures output when HD JPEG Mode is on

, except

480p/576p video resolution mode. You may view photos (JPEG ) through HDMI connection.

• If Auto is selected, it follows preference HDMI aspect ratio of TV.

Content of the output for each output jack is shown in the following table and differ depending on the On-Screen

Display Setting:

"Video Out" HDMI Output HDMI Video AV HDMI Video AV

Setting Setting * Output Output Output Output Output Output

Composite Invalid - Composite Composite - Composite Composite

RGB Invalid - Composite RGB - Composite RGB

480/576p 480p/576p Composite Composite 480p/576p Composite Composite

720p 720p Composite Composite 720p - -

1080i 1080i Composite Composite 1080i - -

1080p 1080p Composite Composite 1080p - -

HDMI

On-Screen Display Setting

HD JPEG Mode: On

Content of output for each output jack

during JPEG playback

Content of output for each output jack

HD JPEG Mode: Off

1 2 ... 9 10 11 12 13 14 15 16 17 18 19 ... 39 40

Kommentare zu diesen Handbüchern

Keine Kommentare

Toshiba SD490 Bedienungsanleitung Seite 14

Kommentare zu diesen Handbüchern