Toshiba IK-WB15A Bedienungsanleitung PDF herunterladen (Seite 14)

0°o

Connecting the Camera and Personal Computer by Networtr (Cont.)

Connection Configuration

Two configurations are available for connecting a network cameras.

■ Crossover connection

■ Connection via a hub, switch, or router

•Using a crossover cable to establish a connection (example)

•Establishing a connection via a hub (example)

LAN cable (straight through) and Hub is not provided with the product.

^NOTE

You do not need to assign an IP address to a hub.

The IP address of your camera after purchasing from the store is automatically

set to 192.168.0.30 in case DHCp is not used. Set the IP address of your

personal computer in the same subnet. (The network segment must be the

same segment when directly connecting using a cross cable or connecting

through the hub)

When connecting more than one camera, connect each camera using IP

Address 192.168.0.30 and change the IP addresses of the second and

subsequent cameras to other IP addresses, such as 192.168.0.31.

You can also use the LAN port of your broadband router.

However, when using the broadband router, if the DHCP server function is

set to "ON", turn on the power after connecting the camera with the router.

The camera gets the IP address from the router's DHCP server and it may

not be 192.168.0.30.

For more information, read your user's guide for broadband router.

It is also recommended to set the computer's IP address from the router's

DHCP server.

For more information, read your computer's user's guide.

1 2 ... 9 10 11 12 13 14 15 16

Keine Kommentare

Toshiba IK-WB15A Bedienungsanleitung Seite 14