Toshiba VL963 Bedienungsanleitung PDF herunterladen (Seite 48)

CONTROLS AND FEATURES

English

USB HDD Record Function

This function can be used to record and play digital

broadcast programmes. Read the precautions

below before recording or viewing programmes

using the USB HDD record function.

NOTE:

• In order to use this function a USB flash memory or USB HDD

needs to be connected to the TV.

• Recorded programmes saved on the USB HDD can only be

viewed on this TV. They cannot be viewed when connected

to another TV (including the same model of TV), a PC, or

other device.

• You cannot watch one channel while recording another.

• If the recording time to the USB HDD is too short, no data

may be saved.

• You cannot record video input signals on the USB HDD.

• Not all types of broadcast may be recordable.

• After programming the TV to record digital broadcasting,

do not disconnect the power plug before recording starts.

Also, leaving the power switch “ON” until recording is

scheduled to start, may cause the recording to fail.

• Should video or audio recording fail due to malfunction of

the TV or poor reception, no compensation shall be paid.

• If there is a power failure or the power plug is disconnected

during programmed recording, recording will stop and will

not resume when the power returns or the plug is

reconnected.

• Do not disconnect the power plug when the indicator LED

is lit.

• Any changes implemented by the broadcasting station may

affect programme scheduling.

• Scheduling of multiple consecutive programmes may result

in the beginning of each programme not being recorded.

• Programmed recording cannot take place if the power plug

is not connected.

• Disconnecting the power plug during recording may result

in failure to save the recorded programme.

• USB HDD recording feature is not available in all countries.

• Do not turn off the TV during recording.

• When the USB HDD is formatted, all the data stored on the

HDD will be erased.

To connect an USB HDD (not supplied)

When you connect a USB HDD to the USB port on the TV, a

prompt will appear.

a Press C or c to select No and press OK.

NOTE: Not guaranteed to work with all USB HDD.

To record the programme currently being viewed.

a Press the zREC button on the remote control.

The currently viewed programme will start to be

recorded.

The programme indicator (red) will be lit.

To stop recording

a Press the v (stop) button.

A confirmation window “Do you want to stop

Recording?” will appear.

b Press C or c to select Yes and press OK.

Recording will stop.

Setting up the USB HDD for recording

To record DTV programmes

(One Touch Recording)

To USB1 or USB2

USB cable

(not supplied)

USB HDD

1 2 ... 43 44 45 46 47 48 49 50 51 52 53 ... 91 92

Kommentare zu diesen Handbüchern

Keine Kommentare

Toshiba VL963 Bedienungsanleitung Seite 48

Kommentare zu diesen Handbüchern

Verwandte Produkte und Handbücher für Monitore Toshiba VL963