Toshiba SATELLITE P500 Bedienungsanleitung PDF herunterladen (Seite 135)

User’s Manual 6-10

Power and Power-Up Modes

Installing the battery pack

To install a battery, follow the steps below.

1. Turn the computer's power off.

2. Disconnect all cables connected to the computer.

3. Slide and hold the battery release latch, and insert the battery pack.

4. Move the battery pack lock to its locked position.

Securing the battery pack

Starting the computer by password

If you have already registered a password, there are two ways to start the

computer:

■ Swipe your fingerprint on the sensor if you have already registered the

fingerprint with the Fingerprint utility and enabled Fingerprint Power-

on Security. If you would not like to swipe your finger or cannot

authenticate the fingerprint for some reason, push the BACK SPACE

key to skip the fingerprint authentication screen. You can try to swipe

the fingerprint up to five times. If you fail fingerprint authentication more

than five times, you must enter the password manually to start the

computer.

■ Enter the password manually.

■ The battery pack is a lithium ion battery, which can explode if not

properly replaced, used, handled or disposed of. Dispose of the

battery as required by local ordinances or regulations. Use only

batteries recommended by TOSHIBA as replacements.

■ Do not touch the latch while holding the computer. If the latch is

unintentionally released, you may get injured by the dropped battery.

1. Battery Pack

2. Battery Pack Lock

3. Battery Release Latch

1 2 ... 130 131 132 133 134 135 136 137 138 139 140 ... 201 202

Keine Kommentare

Toshiba SATELLITE P500 Bedienungsanleitung Seite 135